M800SE Mono Power amplifiers         

This powerful mono block model is for those hard-to-drive and demanding speakers, such as the Monuments and Epitomes which require real bass extension and control and lightning speed with truely staggering dynamic contrasts. And also for lesser, difficult to drive speakers like ATC10 and B&W801 and so on. With 8 Sovtek EL34 power output tubes and 75 watts output per channel (hard to believe its only that much when you hear them), this push-pull Class AB set uses 2 6SN7 twin triode tubes for driver stage delivers neutral and exciting sound. The automatic function for high voltage power delay and 8 adjustable screws for output regulation ensure that the output tubes work optimally.

Soundstage Review.    http://www.soundstage.com/revequip/opera_m800.htm

         (Please Note...We have never heard the noise floor problems mentioned in this review. The amplifiers tested were earlier models and the newer versions use better quality output tubes.)

Click for Hi Res Photograph of T1 and M800

Control Functions:                                 Power On/Off
Inputs:                                                   Left, Right
Output Impedance:                               4,8 ohms. User selectable.
Output Power
at 1 kHz for less than 1%THD:             75W x2(UL) 30W x2(TRIODE)
Bandwidth at - 3dB:                             6Hz to 60kHz
Input Sensitivity for Rated Output:         600mv
Signal / noise:                                        90dB
Input interfaces:                                     1 group (RCA)
Input Impedance:                                  100k
Consumption:                                        90W x2
Tubes:                                                   EL34x8, 6SN7x 4, 6922x2
Dimension:                                            446(L) x 264(W) x 155 (H)mm x2
Weigh:                                                  17kg x2(Net); 17.5kgx2(Shipping)